Designed for FM radio transmitters, this amplifier incorporates broadband matching and a BLF177 MOSFET transistor.

·        86 – 110MHz.

·        50 Volts.

·        Input/output 50 ohms.

·        Pout: 145W minimum***

·        16dB Gain (150W)

·        Class B.

·        4:1 output coax transformer.

·        Requires up to 4.0 watts of input drive for maximum output power.

·        Requires 48 to 50Vdc at 4.5 amps typical.

·        -14dB input return loss or better.

  Please read everything including the data sheet before placing your order.

  This new design incorporates a 4:1 broadband coaxial transformer matching scheme. The result is high efficiency and improved frequency response.

  We also added diode temperature compensated bias for enhanced performance over temperature.

  New bias disable pads facilitate integration into amplifier systems that employ automatic VSWR protection. Taking this pad to ground will shut down the amplifier.

  Click here to view more detailed image of the amplifier. This picture is 250kb jpg format.

  Please download the amplifier data sheet in PDF format (260kb). The data sheet contains detailed performance information and operator instructions.

  Mechanical information is available in DXF Fromat or PDF format.

  Each pallet amplifier we sell is tested on an HP 8753D vector network analyzer.

  This amplifier is capable of 150 watts.

  Our amplifier products use ATC/AVX microwave chip caps for high reliability.

  This pallet is optimized for 48 volt operation. Using a lower voltage will result in poor efficiency and significantly lower output power; however, 28 volt operation is possible.