  .25dB maximum insertion loss, better than -20dB return loss from 88-108MHz. Maximum insertion loss occurs at 108MHz.

  RF connectors are not included. A coax can be soldered directly or PC mountN connectors may be used. We do offer an aluminum enclosure for this filter: Visit this page: Aluminum Enclosure

  The components used are Semco 500V metal cased micas and #14 awg machine wound inductors. This design is based on an Elenos exciter output section.

  Mounts to customers chassis with 8-32 screws. 1/4 inch PCB standoffs or washers are required between the bottom of the PCB and chassis. Installing the filter in a metal chassis is suggested to provide shielding and good thermal conductivity in high power installations.

  This low pass filter is best suited for our 15, 45, 80, 150 and  175W pallets.

  This low pass filter is intended for use in 50 ohm systems only.

·            Model: 250LPF

·             Shipping Weight: 0.25lbs

·             25 Units in Stock

·             Manufactured by: Broadcast Concepts Inc